Phosphate-Bonded High Alumina Bricks
Corundum Phosphate-Bonded High-Wear Brick, grade 1550
A corundum-containing phosphate-bonded high-alumina brick (Al₂O₃ ≥ 72 %) with high abrasion resistance for transition zones of cement kilns and high-temperature zones of lime and magnesium kilns.
Overview
Corundum-containing phosphate-bonded high-alumina brick with Al₂O₃ ≥ 72 %, Fe₂O₃ ≤ 2.0 %, RUL ≥ 1550 ℃ (0.2 MPa, 0.6 %) and abrasion loss ≤ 3.6 cm³.
Applications
- Upper and lower transition zones of cement rotary kilns
- High-temperature zones of lime and magnesium-metal kilns (subject to kiln conditions)
- High-temperature zone of hazardous-waste incineration kilns
Where it is used in the kiln
- Lime rotary kiln · High-temperature / burning zone (subject to kiln conditions)
- Magnesium-metal (dolomite) rotary kiln · High-temperature / burning zone (subject to kiln conditions)
- Zinc-oxide (Waelz) kiln · Burning / reaction zone (subject to kiln conditions)
- Waste-incineration rotary kiln · High-temperature zone
- Cement rotary kiln · Upper transition zone (subject to kiln conditions)
- Cement rotary kiln · Lower transition zone (subject to kiln conditions)
Storage and installation
Phosphate-bonded bricks must be kept dry: cover them in transit and in storage.
Technical data
The technical data sheet for this product is available on request. Send us an inquiry and our engineers will provide data for your kiln conditions.
Related products
Special Phosphate-Bonded Brick, grade 1480
A phosphate-bonded high-alumina brick (Al₂O₃ ≥ 65 %) for cooling zones of cement kilns and transition zones of magnesium-metal kilns.
Special Phosphate-Bonded Wear-Resistant Brick, grade 1400
A phosphate-bonded wear-resistant high-alumina brick (Al₂O₃ ≥ 60 %) for transition and secondary high-temperature zones of rotary kilns.
Phosphate-Bonded Wear-Resistant Brick, grade 1300
A phosphate-bonded wear-resistant brick (Al₂O₃ ≥ 55 %) for preheating and cooling zones of lime, magnesium, zinc-oxide and alumina rotary kilns.
FAQ
Why do RUL values appear as T0.5 or T0.6?
They come from different methods: YB/T 370 (non-differential) reports T0.6, GB/T 5989 / ISO 1893 (differential) reports T0.5, and the two cannot be converted. Jinxing's current data are reported at 0.2 MPa / 0.6 % deformation (T0.6).
Are the data-sheet values guaranteed?
Unless marked "Spec", values are typical and for reference only; each shipment is supplied with its own inspection report.
Why must phosphate-bonded bricks be kept dry?
Unfired or low-temperature-treated phosphate-bonded bricks can lose strength when they absorb moisture, so they must be stored and shipped protected from rain and humidity and installed promptly.
Ask about this product
Tell us the kiln, zone, brick shapes and quantity. We reply within 1 business day.