Products
Dense shaped refractories for rotary kilns, organised by material. Every product page lists test conditions, units and whether a value is a Spec or a Typical value.
Silica Mullite Bricks
Silica-mullite (SiC-containing high-alumina) bricks for wear- and thermal-shock-dominated zones such as the transition and cooling zones of cement rotary kilns.
Phosphate-Bonded High Alumina Bricks
Phosphate-bonded high-alumina and wear-resistant bricks in four grades (1550, 1480, 1400, 1300) by Al₂O₃ content and RUL, for transition, cooling and medium-temperature wear zones of rotary kilns.
Corundum Phosphate-Bonded High-Wear Brick, grade 1550
A corundum-containing phosphate-bonded high-alumina brick (Al₂O₃ ≥ 72 %) with high abrasion resistance for transition zones of cement kilns and high-temperature zones of lime and magnesium kilns.
Special Phosphate-Bonded Brick, grade 1480
A phosphate-bonded high-alumina brick (Al₂O₃ ≥ 65 %) for cooling zones of cement kilns and transition zones of magnesium-metal kilns.
Special Phosphate-Bonded Wear-Resistant Brick, grade 1400
A phosphate-bonded wear-resistant high-alumina brick (Al₂O₃ ≥ 60 %) for transition and secondary high-temperature zones of rotary kilns.
Phosphate-Bonded Wear-Resistant Brick, grade 1300
A phosphate-bonded wear-resistant brick (Al₂O₃ ≥ 55 %) for preheating and cooling zones of lime, magnesium, zinc-oxide and alumina rotary kilns.
Corundum Series
Corundum-based composite and corundum-mullite bricks for high-temperature and transition zones of rotary kilns and areas with severe slag attack.
JX-SN Special Corundum Composite Brick
A chrome-free corundum-based composite brick (Al₂O₃ ≈ 72 %, BD 2.91 g/cm³, RUL T0.6 1696 ℃ in a 2019 third-party test) for transition and high-temperature zones of rotary kilns.
Special Corundum-Mullite Composite Brick
A corundum-mullite brick (Al₂O₃ ≥ 80 %) with RUL ≥ 1700 ℃ for high-temperature and transition zones of lime, magnesium-metal and bauxite rotary kilns; an insulating triple-layer version is offered on request.
Corundum–Silica-Mullite Composite Brick (for lime & magnesium rotary kilns)
A corundum / silica-mullite composite brick combining wear resistance with lower heat loss for burning zones of lime and magnesium-metal rotary kilns.
Si-Zr Corundum-Mullite Composite Brick
A zirconia-containing corundum-mullite composite brick for burning zones of lime, magnesium-metal and bauxite rotary kilns.
Low-Conductivity Corundum Flexible Slag-Resistant Brick
A dense corundum brick (BD ≥ 3.2 g/cm³, AP ≤ 12 %) for slag attack in zinc-oxide (Waelz) kilns, hazardous-waste incinerators and non-ferrous furnaces.
Refractory castables are also supplied. Tell us the application and quantity in your inquiry.